home > News > Charger

How to carry out the aging test of the finished power adapter, the power adapter manufacturer will s

source:Charger     Popular:adapter     release time:2021-07-10 16:05:28     Article author:sznbone    

  The power adapter manufacturer will conduct two aging tests on the product during the production of the power supply to detect what problems may occur in the use of the power supply product, and make timely improvements to eliminate unqualified products to ensure product quality. I have already shared with you how to perform the aging test of semi-finished products, today I will introduce to you how to perform the aging test of the finished power adapter.

How to carry out the aging test of the finished power adapter, the power adapter manufacturer will s(图1)

  Preparation before homework:

  1. Confirm the specifications and models of the aging model and read the contents of the operation instructions of the corresponding model, and clarify the operation steps and operation precautions;

  2. Prepare the tools to be used, and check that the electrical circuits of the aging cabinet are connected normally, turn on the power switch, and load the corresponding aging parameters (the first aging is performed under the guidance of ME or PE);

  Operation steps: 1. Reclaiming inspection: Check that the PCBA surface of the product to be aging is not blackened, the solder joints are full and bright, the input and output electronic wires are soldered firmly, and the wire sequence is correct;

  operation:

  ①Turn on the main power switch to adjust the voltage of the input voltage regulator to 90VAC and use a multimeter to confirm that the voltage displayed on the display is consistent with the test voltage of the multimeter;

  ②Take 3~5PCS of the product to be aging, correctly connect it to the aging cabinet and power it on, monitor the monitor and monitor the corresponding product indicator light and display green light, and the displayed voltage and current are within the set parameter range; otherwise, it is bad, and needs feedback on-site management Or PE and ME to analyze the situation and make adjustments;

  ③Connect the products to be aging to the aging point of the electronic aging cabinet one by one (the brown-blue line at the input end of the product is connected to the input end of the aging cabinet, and the output end red corresponds to "+" and black corresponds to the "-" interface connection);

  ④Standardize safe operations, repeat the above steps, and cycle input 264VAC voltage to age the products to be aging, to ensure that all aging points are connected to the product, the indicator lights of the product will be green, otherwise the product must be removed from the shelf in time, and the bad phenomenon must be marked and sent to PE Analysis and processing

  3. Visual inspection of the cast line:

  ① During the aging process, the aging condition of the product must be monitored at all times to ensure that the aging time of the product is sufficient, and the product is stable and no abnormality during the aging process;

  ②After the aging of the product is completed, first turn off the input power control gate of the aging cabinet. After waiting for 10 minutes, place the product neatly in the turnover box for natural cooling and mark the quantity and status.


Read recommendations:

3-100W PCBA power supply 3-100W Customized power supply 3-100W power supply

100-300W Charger,100W Charger,200W Charger,300W Charger

24-36W Charger,36W Charger,24W Charger,30W Charger

Will using the car charger harm the phone?

How to fill the power adapter with glue

Related Information

Know the power adapter and break the lies of high-speed chargers

2021-11-08

Can the power adapter be universal?

2021-08-20

How are electric car chargers classified?

2021-08-20

How to use the computer power adapter

2021-07-31

Introduction to the three major issues of the power adapter

2021-07-31

Do you know what are the main forms of switching power supply?

2021-07-15

Will using the car charger harm the phone?

2021-07-15

Do you know what are the main forms of switching power supply?

2021-07-14

Will using the car charger harm the phone?

2021-07-14

How to classify the power adapter?

2021-07-13

What should I do for charger troubleshooting?

2021-07-13

How to fill the power adapter with glue

2021-07-10

What is the role of the varistor in the power adapter, the charger manufacturer will share with you

2021-07-10

How to carry out the aging test of the finished power adapter, the power adapter manufacturer will s

2021-07-10

What are the important components in the power adapter

2021-07-10

Do you know the types of mobile phone charger ports?

2021-04-24

What is the cause of the liquid flowing out of the charger

2021-04-24

Classification and characteristics of chargers

2021-04-14

Make your own USB mobile phone charger

2021-04-13

Charger repair and maintenance

2021-04-12

Charger principle

2021-04-12

What is the prospect of scanning the charger and how to cooperate with the hotel?

2021-03-12

How to realize the miniaturization of fast charging chargers, the flat transformer is the breakthrou

2021-03-12

What is the cause of the liquid flowing out of the charger

2021-01-08

Precautions for charging mobile phone chargers

2021-01-08

Popular recommended products

18-25W Switching Power Supply

2020-08-28

24-65W Switching Power Supply

2020-08-29

EI-57 ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter INTERCHANGEABLE ADAPTOR Li

2020-08-28

24-65W Medical Switching Power Supply

2020-08-27

24-36W Charger,36W Charger,24W Charger,30W Charger

2020-08-27

500W Charger,Charger

2020-08-28

EI-28 AC ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter Linear Adapter

2020-08-28

MKS-1202000-36 Switching Power Supply

2020-08-29

36-90W Charger,36W Charger,90W Charger,40W Charger,50W Charger

2020-08-27

24V21A LED Power Supply 24V Power Supply 21A Power Supply

2020-08-27

MK-C1806028 MKA ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

40W 4USB Charger,40W Charger,4USB Charger

2020-08-27

MKS-120200EU-36 Switching Power Supply

2020-08-29

Inductance & Coil

2020-08-27

12W POWER SUPPLY,12W CAR POWER SUPPLY,POWER SUPPLY,CAR POWER SUPPLY

2020-08-27

72-200W Switching Power Supply

2020-08-29

24W 2USB Charger,24W Charger ,2USB Charger

2020-08-27

Transformer,Power Transformer,Ring Power Transformer

2020-08-27

3-15W Switching Power Supply

2020-08-28

QC3.0 24W USB Charger,24W USB Charger,24W USB Charger,USB Charger

2020-08-27

3-100W PCBA power supply 3-100W Customized power supply 3-100W power supply

2020-08-27

MKS-1203000EX Switching Power Supply

2020-08-29

3-8W Charger,3W Charger,8W Charger,4W Charger,5W Charger,6W Charger,7W Charger

2020-08-27

30-500W LED Power Supply 30-500W Power Supply

2020-08-27

12W CAR CHARGER,12W USB CAR CHARGER,CAR CHARGER,12W CHARGER

2020-08-27

MKA-571652420 ADAPTER AC ADAPTER CE ADAPTOR UL ADAPTOR Linear Adapter

2020-08-28

200-500W Switching Power Supply

2020-08-29

24W USB Charger,24W Charger,USB Charger

2020-08-27

30W PD Charger,30W Charger,PD Charger

2020-08-27

Transformer,High Frequency Transformer,Frequency Transformer

2020-08-27
Copyright 2020 © Merryking Technology Co., Ltd. All rights reserved