home > News > Industry News

Common fault maintenance skills of switching power supply

source:Industry News     Popular:adapter     release time:2022-05-14 09:18:25     Article author:yu    

  Common fault maintenance skills of switching power supply(图1)

  Power failures account for the majority of electronic equipment failures in electrical troubleshooting. Therefore, being familiar with the common faults and maintenance skills of switching power supplies is conducive to shortening the maintenance time of electronic equipment failures and improving personal equipment maintenance skills.

  1. Common faults

  ⑴ Fuse blown:

  In general, a blown fuse indicates a problem with the internal circuit of the power supply. Since the power supply works under the condition of high voltage and high current, the fluctuation and surge of the grid voltage will cause the current in the power supply to increase instantaneously and cause the fuse to blow. The key point should be to check the rectifier diodes, high-voltage filter electrolytic capacitors, inverter power switch tubes, etc. at the input end of the power supply, and check whether these components have breakdown, open circuit, damage, etc. If the fuse is indeed blown, you should first check the various components on the circuit board to see if the surface of these components is burnt and whether there is electrolyte overflow. . It is necessary to pay special attention: when a component is found to be damaged, it must not be turned on directly after replacement. It is very likely that the replaced component will be damaged because other high-voltage components are still faulty. Be sure to conduct a comprehensive inspection of all high-voltage components of the above circuit. After checking and measuring, the fault of blown fuse can be completely ruled out.

  (2) No DC voltage output or unstable voltage output

  If the fuse is in good condition, under the condition of load, there is no output of DC voltage at all levels. This situation is mainly caused by the following reasons: open circuit and short circuit in the power supply, overvoltage and overcurrent protection circuit failure, auxiliary power supply failure, oscillation circuit not working, power supply overload, rectifier diode in high frequency rectifier filter circuit Breakdown, leakage of filter capacitors, etc. After measuring the secondary components with a multimeter and ruling out the breakdown of the high-frequency rectifier diode and the short-circuit of the load, if the output is zero at this time, it is certain that the control circuit of the power supply is faulty. If there is some voltage output, it means that the pre-stage circuit is working normally, and the fault is in the high-frequency rectifier and filter circuit. The high-frequency filter circuit is mainly composed of a rectifier diode and a low-voltage filter capacitor to form a DC voltage output. The breakdown of the rectifier diode will cause no voltage output in the circuit, and the leakage of the filter capacitor will cause the output voltage to be unstable and other faults. The damaged components can be detected by statically measuring the corresponding components with a multimeter.

  (3) Poor power load capacity

  Poor load capacity of power supply is a common fault, which usually occurs in old-fashioned or long-working power supplies. Should focus on checking whether the Zener diode generates heat and leakage, the rectifier diode is damaged, the high-voltage filter capacitor is damaged, etc.


Read recommendations:

12V2ASwitching Power Supply

Transformer,Power Transformer,Ring Power Transformer

24V1.5A 36W Switching Power Supply

Which fields can the power adapter be used in?power adapter Processing

Maintenance steps and methods of power adapter.AC ADAPTER

Related Information

What are the conditions of use and maintenance methods for switching power supplies?

2022-05-21

Some Frequently Asked Questions about Power Adapters

2022-05-20

How to deal with the electromagnetic interference of switching power supply which is difficult in EM

2022-05-19

Six situations and solutions that cause the whistling of switching power supplies.power supply price

2022-05-18

Lightning Surge Test Method for Switching Power Adapters.adapter factory

2022-05-17

Two common power adapter output overload protection methods.ADAPTOR price

2022-05-16

Common fault maintenance skills of switching power supply

2022-05-14

How should we choose the charger?

2022-05-13

Power adapter expertise.CE ADAPTOR

2022-05-12

How to solve the high temperature rise of switching power supply transformer?

2022-05-11

The role of varistor in switching power supply

2022-05-10

Structural characteristics and working principle of varistor

2022-05-09

The role of varistor in switching power supply

2022-05-09

What are the main components of switching power supply

2022-05-07

Two ways for MOS devices to dissipate in high-power power supplies,CE ADAPTOR Processing

2022-05-06

Several common insulation protection technologies for power adapters

2022-05-05

What are the unique advantages of high frequency switching power adapter

2022-04-27

What are the main components of switching power supply.China cnc plastic cutting

2022-04-26

Troubleshooting method of switching power supply,CE ADAPTOR wholesale

2022-04-25

How to use the power adapter correctly

2022-04-23

What is the comparison between a charger and an adapter?

2022-04-23

The optimal solution of drone power management solution!

2022-04-22

Several common insulation protection technologies for power adapters

2022-04-21

What are the unique advantages of high frequency switching power adapter

2022-04-20

General Mechanism Analysis of Switching Power Adapter.ac power adapter wholesaler

2022-04-19

Suppression method of low frequency ripple of switching power supply

2022-04-16

Why is the power adapter making noise?

2022-04-15

When the power adapter is in normal use, what is the normal temperature?

2022-04-14

90% of people use the car charger incorrectly, are you using it right?CAR POWER SUPPLY sales

2022-04-13

The difference between a power adapter and a voltage regulator

2022-04-12

Popular recommended products

12-24W Medical Switching Power Supply

2020-08-27

Inductance & Coil

2020-08-27

ER42 High Frequency Transformer

2020-08-27

24-36W Charger,36W Charger,24W Charger,30W Charger

2020-08-27

MKD-571202000 ADAPTER AC ADAPTER CE ADAPTOR UL ADAPTOR Linear Adapter

2020-08-28

10-24W Charger,24W Charger,10W Charger

2020-08-27

12VDC8A 96W power supply

2020-08-28

EI-35 ADAPTER AC ADAPTER SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

MKS-1401700H Switching Power Supply

2020-08-29

MKS-1201250HEU Switching Power Supply

2020-08-29

MK-C1806028 MKA ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

MKS-1202000-36 Switching Power Supply

2020-08-29

500W Charger,Charger

2020-08-28

EI-57 ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter INTERCHANGEABLE ADAPTOR Li

2020-08-28

30-500W LED Power Supply 30-500W Power Supply

2020-08-27

12W POWER SUPPLY,12W CAR POWER SUPPLY,POWER SUPPLY,CAR POWER SUPPLY

2020-08-27

72-200W Switching Power Supply

2020-08-29

24-65W Switching Power Supply

2020-08-29

EI Power Transformer Power Transformer

2020-08-27

MKS-120200BS-36 Switching Power Supply

2020-08-29

100-300W Charger,100W Charger,200W Charger,300W Charger

2020-08-27

3-12W Medical Switching Power Supply 3W Switching Power Supply 12W Power Supply

2020-08-27

12W CAR CHARGER,12W USB CAR CHARGER,CAR CHARGER,12W CHARGER

2020-08-27

QC3.0 24W USB Charger,24W USB Charger,24W USB Charger,USB Charger

2020-08-27

3-8W Charger,3W Charger,8W Charger,4W Charger,5W Charger,6W Charger,7W Charger

2020-08-27

MKS-1203000EX Switching Power Supply

2020-08-29

40W 4USB Charger,40W Charger,4USB Charger

2020-08-27

18-25W Switching Power Supply

2020-08-28

24W 2USB Charger,24W Charger ,2USB Charger

2020-08-27

Transformer,Power Transformer,Ring Power Transformer

2020-08-27
Copyright 2020 © Merryking Technology Co., Ltd. All rights reserved