home > News > Charger

How to fill the power adapter with glue

source:Charger     Popular:adapter     release time:2021-07-10 16:07:46     Article author:sznbone    

  Pour glue on the power adapter. By pouring glue on the power adapter, the water-proof, moisture-proof and anti-corrosion ability of the circuit components can be improved. In order to increase the service life of the product, how to fill the power adapter with glue? Today, the power adapter manufacturer will share with you.

How to fill the power adapter with glue(图1)

  Preparation before homework:

  1. Read the work instructions carefully, clarify the content of the work, be familiar with the work steps, prepare to use the tools and check the materials used; check the equipment power connection is OK, and the glue nozzle is intact;

  2. Wear gloves before working. Under the guidance of ME technicians, automatically stir the silica gel of pumps A and B for more than 10 minutes, and under the supervision of IPQC, the glue output weight of pumps A and B per unit time should be the same (ie A: B=1:1)

  work procedure:

  1. Reclaiming inspection: check that the output end of the product to be poured is tightly locked and does not show any gaps;

  2, homework:

  ①Check that the side cover of the input end of the product and the aluminum shell are tightly locked without showing any gaps, and adjust the width of the glue-filling fixture to be consistent with the thickness of the product, and put the product input end into the glue-filling fixture and fix it so as not to loosen. The position of the input line and the side cover does not affect the glue filling operation;

  ②Enter the system and set the glue filling to automatic glue filling, and set the automatic glue filling time to 64S and place the product to be filled under the nozzle of the glue filling machine, and press the "run button" standby device by hand After stopping, move the jig to perform the glue filling operation of the next product; when filling the glue, pay attention to the first filling amount not to be too full. Keep the silicone gel away from the aluminum shell cut-out position about 3~5mm deep, and do not overflow the silicone tape. On the outside of the aluminum shell;

  ③Regulate the operation, repeat the above steps to ensure that the first potting of the product is about 3~5mm away from the cutout of the aluminum shell, and there is no overflow of silica gel;

  3. Visual inspection of the line: Put the products that are OK for one-time glue filling as if they are neatly placed in a vacuum machine.


Read recommendations:

72-200W Switching Power Supply

60W 6USB Charger,60W Charger,6USB Charger,Charger

3-8W Charger,3W Charger,8W Charger,4W Charger,5W Charger,6W Charger,7W Charger

Precautions for charging mobile phone chargers

Do you know what are the main forms of switching power supply?

Related Information

Know the power adapter and break the lies of high-speed chargers

2021-11-08

Can the power adapter be universal?

2021-08-20

How are electric car chargers classified?

2021-08-20

How to use the computer power adapter

2021-07-31

Introduction to the three major issues of the power adapter

2021-07-31

Do you know what are the main forms of switching power supply?

2021-07-15

Will using the car charger harm the phone?

2021-07-15

Do you know what are the main forms of switching power supply?

2021-07-14

Will using the car charger harm the phone?

2021-07-14

How to classify the power adapter?

2021-07-13

What should I do for charger troubleshooting?

2021-07-13

How to fill the power adapter with glue

2021-07-10

What is the role of the varistor in the power adapter, the charger manufacturer will share with you

2021-07-10

How to carry out the aging test of the finished power adapter, the power adapter manufacturer will s

2021-07-10

What are the important components in the power adapter

2021-07-10

Do you know the types of mobile phone charger ports?

2021-04-24

What is the cause of the liquid flowing out of the charger

2021-04-24

Classification and characteristics of chargers

2021-04-14

Make your own USB mobile phone charger

2021-04-13

Charger repair and maintenance

2021-04-12

Charger principle

2021-04-12

What is the prospect of scanning the charger and how to cooperate with the hotel?

2021-03-12

How to realize the miniaturization of fast charging chargers, the flat transformer is the breakthrou

2021-03-12

What is the cause of the liquid flowing out of the charger

2021-01-08

Precautions for charging mobile phone chargers

2021-01-08

Popular recommended products

EI-35 ADAPTER AC ADAPTER SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

36-65W Switching Power Supply

2020-08-29

Transformer,High Frequency Transformer,Frequency Transformer

2020-08-27

EI-48 ADAPTER LINEAR ADAPTOR Switching Power Adapter INTERCHANGEABLE ADAPTOR Linear Adapter

2020-08-28

40W 4USB Charger,40W Charger,4USB Charger

2020-08-27

MKS-1203000EX Switching Power Supply

2020-08-29

12W POWER SUPPLY,12W CAR POWER SUPPLY,POWER SUPPLY,CAR POWER SUPPLY

2020-08-27

MKS-1401700H Switching Power Supply

2020-08-29

12-36W POE POWER SUPPLY

2020-08-27

24-65W Medical Switching Power Supply

2020-08-27

12W 2USB Charger,2USB Charger,12W Charger,USB Charger

2020-08-27

Inductance & Coil

2020-08-27

24V21A LED Power Supply 24V Power Supply 21A Power Supply

2020-08-27

12W CAR CHARGER,12W USB CAR CHARGER,CAR CHARGER,12W CHARGER

2020-08-27

EI-41 ADAPTER AC ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Adapter

2020-08-28

12VDC8A 96W power supply

2020-08-28

EI-28 AC ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter Linear Adapter

2020-08-28

EI Power Transformer Power Transformer

2020-08-27

24-36W Charger,36W Charger,24W Charger,30W Charger

2020-08-27

12-24W Medical Switching Power Supply

2020-08-27

MKS-120200BS-36 Switching Power Supply

2020-08-29

EI-66 ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

QC3.0 24W USB Charger,24W USB Charger,24W USB Charger,USB Charger

2020-08-27

45W PD Charger,45W Charger,PD Charger

2020-08-27

MKS-1201250HEU Switching Power Supply

2020-08-29

Transformer,Power Transformer,Ring Power Transformer

2020-08-27

MKS-1202000-36 Switching Power Supply

2020-08-29

18-25W Switching Power Supply

2020-08-28

ER42 High Frequency Transformer

2020-08-27

72-200W Switching Power Supply

2020-08-29
Copyright 2020 © Merryking Technology Co., Ltd. All rights reserved