home > News > Industry News

What is the main reason for the low output voltage caused by the power adapter?ac power adapters sal

source:Industry News     Popular:adapter     release time:2021-12-28 10:17:21     Article author:sznbone    

  What is the main reason for the low output voltage caused by the power adapter?ac power adapters sal(图1)

  The following are the main reasons for the low output voltage caused by the power adapter:

  1. Switching power supply load short-circuit failure (especially DC/DC converter short-circuit or poor performance, etc.), at this time, first disconnect all loads of the switching power supply circuit, and check whether the switching power supply circuit is faulty or the load circuit is faulty. If the load circuit is disconnected and the voltage output is normal, it means that the load is too heavy; or it is still abnormal, it means that the switching power supply circuit is faulty.

  2. The failure of the filter capacitor or rectifier diode at the output voltage can be judged by the replacement method.

  3. The performance of the switching tube is degraded, causing the switching tube to fail to conduct normally, which increases the internal resistance of the power supply and reduces the load capacity.

  4. Poor switching transformer not only causes the output voltage to drop, but also causes insufficient excitation of the switching tube and damages the switching tube.

  5. The poor 300V filter capacitor results in poor load carrying capacity of the power supply, and the output voltage will drop as soon as the load is connected.

  The output voltage is too high

  Excessive output voltage generally comes from voltage stabilization sampling and voltage stabilization control circuits. In the closed control loop composed of DC output, sampling resistor, error sampling amplifier such as TL431, optocoupler, power control chip and other circuits, any one of the components will cause the output voltage to rise.

  The fuse is normal, no output voltage

  The fuse is normal and no output voltage indicates that the switching power supply is not working or has entered a protection state. The first step is to check the value of the startup voltage of the startup pin of the power control chip. If there is no startup voltage or the startup voltage is too low, check whether the external components of the startup pin and the startup resistor are leaking.

  If the power control chip is normal, the fault can be quickly found through the above monitoring. If there is a startup voltage, measure whether there are high and low level jumps at the output terminal of the control chip at the moment of power-on. If there is no jump, it means that the control chip is damaged, the peripheral oscillation circuit components are damaged or the protection circuit is faulty, and the control chip is replaced. Chips, check the peripheral components, and check them one by one; if they are changing, most of them are bad or damaged switch tubes.

  Insurance burned out or blown up

  Mainly check the rectifier bridge, each diode, switch tube and the large filter capacitor on 300 volts and other parts. It may cause the insurance to burn and turn black, or it may be caused by a problem with the anti-interference circuit. It is especially worth noting that the fuse is burnt due to the breakdown of the switch tube, which usually burns out the power control chip and the current detection resistor. The thermistor is also easy to burn out along with the insurance


Read recommendations:

EI Power Transformer Power Transformer

3-15W Switching Power Supply

36-65W Switching Power Supply

How to design a good power adapter,CAR CHARGER wholesaler

Things to pay attention to when connecting terminals

Related Information

What are the conditions of use and maintenance methods for switching power supplies?

2022-05-21

Some Frequently Asked Questions about Power Adapters

2022-05-20

How to deal with the electromagnetic interference of switching power supply which is difficult in EM

2022-05-19

Six situations and solutions that cause the whistling of switching power supplies.power supply price

2022-05-18

Lightning Surge Test Method for Switching Power Adapters.adapter factory

2022-05-17

Two common power adapter output overload protection methods.ADAPTOR price

2022-05-16

Common fault maintenance skills of switching power supply

2022-05-14

How should we choose the charger?

2022-05-13

Power adapter expertise.CE ADAPTOR

2022-05-12

How to solve the high temperature rise of switching power supply transformer?

2022-05-11

The role of varistor in switching power supply

2022-05-10

Structural characteristics and working principle of varistor

2022-05-09

The role of varistor in switching power supply

2022-05-09

What are the main components of switching power supply

2022-05-07

Two ways for MOS devices to dissipate in high-power power supplies,CE ADAPTOR Processing

2022-05-06

Several common insulation protection technologies for power adapters

2022-05-05

What are the unique advantages of high frequency switching power adapter

2022-04-27

What are the main components of switching power supply.China cnc plastic cutting

2022-04-26

Troubleshooting method of switching power supply,CE ADAPTOR wholesale

2022-04-25

How to use the power adapter correctly

2022-04-23

What is the comparison between a charger and an adapter?

2022-04-23

The optimal solution of drone power management solution!

2022-04-22

Several common insulation protection technologies for power adapters

2022-04-21

What are the unique advantages of high frequency switching power adapter

2022-04-20

General Mechanism Analysis of Switching Power Adapter.ac power adapter wholesaler

2022-04-19

Suppression method of low frequency ripple of switching power supply

2022-04-16

Why is the power adapter making noise?

2022-04-15

When the power adapter is in normal use, what is the normal temperature?

2022-04-14

90% of people use the car charger incorrectly, are you using it right?CAR POWER SUPPLY sales

2022-04-13

The difference between a power adapter and a voltage regulator

2022-04-12

Popular recommended products

MKS-1203000EX Switching Power Supply

2020-08-29

12W CAR CHARGER,12W USB CAR CHARGER,CAR CHARGER,12W CHARGER

2020-08-27

36-65W Switching Power Supply

2020-08-29

30-500W LED Power Supply 30-500W Power Supply

2020-08-27

72-200W Switching Power Supply

2020-08-29

EI-48 ADAPTER LINEAR ADAPTOR Switching Power Adapter INTERCHANGEABLE ADAPTOR Linear Adapter

2020-08-28

12W POWER SUPPLY,12W CAR POWER SUPPLY,POWER SUPPLY,CAR POWER SUPPLY

2020-08-27

EI-35 ADAPTER AC ADAPTER SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

3-15W Switching Power Supply

2020-08-28

30W PD Charger,30W Charger,PD Charger

2020-08-27

24W USB Charger,24W Charger,USB Charger

2020-08-27

12-24W Medical Switching Power Supply

2020-08-27

MKS-1401700H Switching Power Supply

2020-08-29

200-500W Switching Power Supply

2020-08-29

24W 2USB Charger,24W Charger ,2USB Charger

2020-08-27

3-100W PCBA power supply 3-100W Customized power supply 3-100W power supply

2020-08-27

36-90W Charger,36W Charger,90W Charger,40W Charger,50W Charger

2020-08-27

45W PD Charger,45W Charger,PD Charger

2020-08-27

Transformer,High Frequency Transformer,Frequency Transformer

2020-08-27

24-36W Charger,36W Charger,24W Charger,30W Charger

2020-08-27

3-12W Medical Switching Power Supply 3W Switching Power Supply 12W Power Supply

2020-08-27

EI-57 ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter INTERCHANGEABLE ADAPTOR Li

2020-08-28

12-36W POE POWER SUPPLY

2020-08-27

EI-66 ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

12V2ASwitching Power Supply

2020-08-28

500W Charger,Charger

2020-08-28

MKD-571202000 ADAPTER AC ADAPTER CE ADAPTOR UL ADAPTOR Linear Adapter

2020-08-28

19V2A 36W Switching Power Supply

2020-08-28

Inductance & Coil

2020-08-27

10-24W Charger,24W Charger,10W Charger

2020-08-27
Copyright 2020 © Merryking Technology Co., Ltd. All rights reserved